Important information about purchasing from Amazon in the US.
RØDE Microphones does not authorize Fulfilled By Amazon. We have purchased counterfeit RØDE products using Fulfilled by Amazon and highly recommend that you only purchase RØDE products from authorised dealers.
If you purchase any RØDE microphone from an unauthorized dealer via Fulfilled By Amazon you will not receive any US warranty or technical support.
You can view a full list of authorized US dealers here.
46 Online retailers selling the NT3
The NT3 is the definition of a studio workhorse. Featuring an end-address 3/4" gold-sputtered true-condenser transducer it provides incredible detail on almost any instrument you can imagine.
Intended for studio, stage and location work, this versatile handheld, stand or boompole mounted microphone will give great results on drums, percussion, acoustic guitar, guitar amps, piano and all acoustic instruments as well as detailed voice reproduction when used as a handheld presentation microphone or indoor boom mic.
For further versatility the NT3 can be powered by either P48 phantom power, or via a 9V battery for situations when power isn't available via the console or camera. Its rugged and durable all-metal body and mesh head ensure that it is well protected both in the studio and out in the field.
The RØDE NT3 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
|Acoustic Principle||Pressure Gradient|
|Active Electronics||JFET impedance converter with bipolar output buffer|
|Frequency Range||20Hz - 20kHz|
|Maximum SPL||140dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Maximum Output Level||9.5mV|
|Sensitivity||-39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||16dB-A|
|Dimensions||206.00mmH x 32.00mmW x 32.00mmD|
|Warranty||1 year with free extension to 10 years following registration here|
Some mics are built with one specific purpose in mind. Others are well rounded and can do more. The RØDE NT3 is a mic that falls into this category. I needed something that was going to be versatile, durable, and accurate. I didn’t want to spend an insane amount of money wanted something that was going to be simple to use. Since I’ve been using the NT1-a for a while and absolutely love it, I figured I would give the RØDE NT3 a try.
It fells well built, much like the other RØDE mics I’ve had a chance to use. The NT3 can be powered by a 9 volt battery or phantom power from your preamp. It is roughly 9 inches long and the bottom unscrews to access the battery compartment. The battery option is one that is great to have if you’re considering using this mic with a camera for video production. It’s durability and size make an excellent choice for a field mic. There is a power switch so you don’t have to remove the battery every time you use it.
I use this mic mostly for acoustic guitar and hand percussion. It Represents the high end very well with a lot of presence in the sound, and the design allows for good room ambiance. It actually records room and outdoor conversation pretty good. I imagine that this would be a great field mic for low-budget video production.
I think that this mic has multiple of uses in a home studio. It can be used to record any acoustic instruments, which is a plus, but it also sounds good when recording from slightly farther away. I like the way it sounds as a reinforcement mic.
The handbook suggests that the NT3 is suitable for a wide range of applications and I would concur that it is a versatile jack of all trades. It offers remarkable performance and capacitor-microphone sonic virtues at a very affordable price, and as such it redefines the term 'value for money'.
This is an amazing mic for the money. It's frequency response is absolutely flat, the mic electronics have very low self noise... The NT3 is a excellent value for the money and is solidly made.
Yes, we bought another four (NT3s). We're using them daily and they're extremely reliable. Our Sennheisers MD421 are out of business. We love the incredible high output.
I dropped it more than once, but because of its solid built, i found no dent on the grill,or any malfuctions what soever. Very cool mic to have on your arsenal.
I recently purchased an NT3 to replace the RØDE VideoMic for recording live video. I'm a keynote speaker and I video record all of my speeches.
The NT3's awesome sound has added more depth to my recordings. The ability to power with either a 9v or 48v phantom power makes this a flexible microphone for use in the field or in the studio ... I can slip the NT3 into the shoe mount on my video camera and go, or I can mount it on a boom pole over my talent in the studio.
Best of all, like all things RØDE, the price point is fantastic! Great quality for a decent price.
If you are looking at this mic, I'm sure you've already thought about the AKG C1000 and maybe the AT3040 mics. The NT3 is superior to both of these. As we all know, the C1000 is a great deal, but the sound of that mic is cheap, brittle and tinny. The NT3 will give you a crisp high end without sounding harsh. The NT3 has a pretty tight pattern with a great casing. It's durable and good looking, plus takes 9V power for field work.
I'm using this microphone to shoot video interviews with two people at once. I position the microphone between them and it's cardioid pattern picks up both of them just fine. Before I got this NT-3 cardioid I was using my NTG-2 shotgun for these interviews and I couldn't get the audio right. Now it's a cinch. I also like that it has an On/Off switch which should help to conserve battery life.
This microphone is a great workhorse mic around the studio. It works great for guitars, drum overheads, vocals, horns, and lots of other things. It is very sensitive so you get a lot of detail, but be careful around loud extra noises. It tends to pick up lots of room noises since it is so sensitve. It also performs very well as a field recording mic in a stereo pair or just mono. That is what I bought this mic for originally but I just keep finding more uses for it. Good buy at a great price.
To connect the XLR microphone output to a TRS stereo input (3.5mm socket) you will need to buy or make a XLR to stereo TRS cable, to make the cable please follow the instructions in the picture below. This cable will allow connection between the microphone and a camcorder or DSLR camera.
This cable will allow you to connect your microphone output to a stereo TRS input and receive the audio signal on both the input channels.
Please Note: Should the microphone require phantom power to operate, this will not be available from a TRS socket.
We recommend an Alkaline or Lithium battery for the best possible battery life. All RØDE specifications have been carried out using this type of battery. If you use a slightly lower power battery, the mic will work but may not meet our published specifcation.
1" Cardioid Condenser Microphone
1" Studio Condenser Microphone
Multi-Pattern Dual 1" Condenser Microphone
Seamlessly Variable Dual 1" Condenser Microphone
Variable Pattern Dual 1" Condenser Valve Microphone
Valve 1" Condenser Microphone
Limited Edition Vintage-Voiced Valve Microphone
Stereo Microphone for Apple iPhone® & iPad®
1" Cardioid Condenser Microphone
Versatile Studio-Quality USB Microphone
Broadcast-grade stereo on-camera microphone
Active Ribbon Microphone